Grand Caravan V6-3.8L (2009)
Seat Heater Switch: Service and Repair
Heated Seat Switch - Installation
Front
INSTALLATION
Automatic Temperature Control (ATC)
1. Position the A/C-heater control (2) into the instrument panel center bezel (3).
2. Install the screws (1) that secure the A/C-heater control to the center bezel. Tighten the screws to 2 Nm (17 in. lbs.).
CAUTION: Each wire connector is individually keyed to its respective receptacle on the back of the A/C-heater control. Be sure to note the
color and location of each connector when reinstalled to the back of the A/C-heater control. Do not force any connector onto the
A/C-heater control. Failure to follow this caution can damage the A/C-heater control system.
3. Install the instrument panel center bezel (1).
4. Reconnect the negative battery cable.
5. Calibrate the A/C-heater control See: Heating and Air Conditioning/Testing and Inspection/Component Tests and General Diagnostics/HVAC
System Test.
Manual Temperature Control (MTC)
1. Position the A/C-heater control (2) into the instrument panel center bezel (3).
2. Install the screws (1) that secure the A/C-heater control to the center bezel. Tighten the screws to 2 Nm (17 in. lbs.).
CAUTION: Each wire connector is individually keyed to its respective receptacle on the back of the A/C-heater control. Be sure to note the
color and location of each connector when reinstalled to the back of the A/C-heater control. Do not force any connector onto the
A/C-heater control. Failure to follow this caution can damage the A/C-heater control system.