Intrepid V6-2.7L VIN R (2003)
Odometer: Service and Repair
Trip Odometer Reset Knob Replacement
REMOVAL
The instrument cluster must be removed for Trip Reset Knob service.
1. Open hood and disconnect the negative battery cable remote terminal from the remote battery post.
2. Remove instrument cluster from vehicle. Refer to Electrical, Instrument Cluster REMOVAL.
3. Remove five cluster back cover retaining screws and remove the cover.
4. Remove nine screws to Printed Circuit Board and remove.
5. Gently pull Trip Reset Knob from the instrument cluster housing and remove.
INSTALLATION
1. Gently put Trip Odometer Reset Knob into the mask/lens.
2. Install the nine screws to Printed Circuit Board.
3. Install the five cluster back cover retaining screws.
4. Install the instrument cluster. Refer to Electrical, Instrument Cluster INSTALLATION.
5. Connect the negative battery cable remote terminal to the remote battery post.