Intrepid V6-2.7L VIN R (2003)
Odometer: Service and Repair
Odometer Replacement
REMOVAL
The instrument cluster must be removed for Odometer service Refer to Instrument Cluster REMOVAL and INSTALLATION.
On Intrepid, Concorde, and 300M models, the odometer and PRNDL are one assembly retained by three screws.
1. Open hood and disconnect the negative battery cable remote terminal from the remote battery post.
2. Remove instrument cluster from vehicle. Refer to Instrument Cluster REMOVAL and INSTALLATION.
3. Remove five cluster back cover retaining screws and remove the cover.
4. Unplug connectors from printed circuit board.
5. Remove cluster mask/lens from instrument cluster. Refer to Mask/Lens REMOVAL and INSTALLATION.
6. Remove two screws to Vacuum Fluorescent (VF) display Odometer and remove from cluster.
INSTALLATION
1. Install the two screws to Vacuum Fluorescent (VF) display.
2. Install the cluster mask/lens on to the instrument cluster. Refer to Mask/Lens REMOVAL and INSTALLATION.
3. Install connectors to the printed circuit board.
4. Install the five cluster back cover retaining screws.
5. Install the instrument cluster in vehicle. Refer to Instrument Cluster REMOVAL and INSTALLATION.
6. Connect the negative battery cable remote terminal to the remote battery post.
