Alignment: Specifications
- Make
- Dodge
- Model
- Intrepid
- Engine
- V6-3.5L VIN G
- Year
- 2002
- Section
- Alignment › Specifications
Alignment: Specifications
Vehicle Curb Height
Concorde/LHS/300 M
Front
739 mm +/- 20mm
29.09 in. +/- 0.79 in.
Intrepid
Rear
754 mm +/- 20 mm
29.68 in. +/- 0.79 in.
Front
729 mm +/- 20 mm
28.70 in. +/- 0.79 in.
Rear
735 mm +/- 20 mm
28.93 in. +/- 0.79 in.
Front Wheel Alignment
Camber: Cross Camber (Maximum Side-To Side Difference) Preferred Setting
0.00 deg
0.00 deg
Acceptable Range
-0.60 deg to + 0.60 deg
0.70 deg
Caster Cross Caster (Maximum Side-to Side Difference)
Preferred Setting
+3.00 deg
0.00 deg
Acceptable Range
+2.00 deg to + 4.00 deg
1.00 deg
Total Toe
Preferred Setting
0.00 deg
Total Toe is the sum of both the left and right wheel toe settings. TOTAL
TOE must be equally split between each front wheel to ensure the steering
wheel is centered after setting toe. Positive (+) is Toe-in, Negative (-) is
Toe-Out.
Acceptable Range
-0.20 deg to + 0.20 deg
Rear Wheel Alignment
Camber
Preferred Setting
-0.20 deg
Acceptable Range
-0.70 deg to + 0.30 deg
Total Toe
Preferred Setting
+0.10 deg
Total Toe is the sum of both the left and right wheel toe settings. TOTAL
TOE must be equally split between each front wheel to ensure the steering
wheel is centered after setting toe. Positive (+) is Toe-in, Negative (-) is
Toe-Out.
Acceptable Setting
-0.20 deg to + 0.40 deg
Thrust Angle
Preferred Setting
0.00 deg
Acceptable Setting
-0.15 deg to + 0.15 deg
Pinch or Ctrl + scroll to zoom. Double-tap to reset.
Parts & tools for this job For 2002 Dodge Intrepid 3.5L
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Dodge power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.