Journey AWD V6-3.5L (2009)
Antenna, Radio: Service and Repair
Antenna - Installation
INSTALLATION
SATELLITE AUDIO ONLY
NOTE: The antenna cables are integrated into the body wiring harnesses. New antenna cables is overlaid on the body wiring harness.
1. Route the cable behind the glove box, up to the radio and secure.
2. Connect the antenna to the radio.
3. Install the radio See: Radio, Stereo, and Compact Disc/Radio/Stereo/Service and Repair/Removal and Replacement/Radio - Installation.
4. Install the glove box See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair/Instrument Panel Glove Box -
Installation.
5. Route the antenna cable along the path of the old antenna wiring harness, securing where necessary.
6. Install the passenger side cowl panel See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Cowl Trim Panel -
Installation.
7. Install the passenger side quarter trim panel See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Luggage Compartment
Trim/Quarter Trim Panel - Installation.
8. Install the passenger side scuff plates See: Body and Frame/Interior Moulding / Trim/Scuff Plate/Service and Repair/Scuff Plate - Installation.
9. Install the passenger side C-pillar See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/C-Pillar Trim
Panel-Installation.
10. Install the antenna base to the roof of the vehicle.
11. Install the antenna bracket and mounting fastener.
12. Install the antenna cable(s).
13. Install the headliner See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Headliner - Installation.
14. Connect the battery negative cable.
SATELLITE AUDIO AND VIDEO
AUDIO CABLE TO MODULE
NOTE: The antenna cables are integrated into the body wiring harnesses. New antenna cables is overlaid on the body wiring harness.
1. Connect the antenna cable to the module located under the front passenger seat.
2. Route the antenna cable along the path of the old audio antenna wiring harness, securing where necessary.
3. Install the passenger side cowl panel See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Cowl Trim Panel -
Installation.
4. Install the passenger side quarter trim panel See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Luggage Compartment
Trim/Quarter Trim Panel - Installation.
5. Install the passenger side scuff plates See: Body and Frame/Interior Moulding / Trim/Scuff Plate/Service and Repair/Scuff Plate - Installation.
6. Install the passenger side C-pillar See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/C-Pillar Trim
Panel-Installation.
7. Install the antenna base to the roof of the vehicle.
8. Install the antenna bracket and mounting fastener.
9. Install the antenna cable(s).
10. Install the headliner See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Headliner - Installation.
11. Position the passenger seat to its original position.
12. Connect the battery negative cable.
VIDEO CABLE TO MODULE
NOTE: The antenna cables are integrated into the body wiring harnesses. New antenna cables is overlaid on the body wiring harness.
1. Connect the antenna cable to the module located under the passenger seat.
2. Route the antenna cable along the path of the old audio antenna wiring harness, securing where necessary.
3. Install the passenger side cowl panel See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Cowl Trim Panel -
Installation.
4. Install the front passenger side scuff plate See: Body and Frame/Interior Moulding / Trim/Scuff Plate/Service and Repair/Scuff Plate - Installation.
5. Install the antenna base to the roof of the vehicle.
6. Install the antenna bracket and mounting fastener.
7. Install the antenna cable(s).
8. Install the headliner See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Headliner - Installation.
9. Position the passenger seat to its original position.
10. Connect the battery negative cable.
