Journey AWD V6-3.5L (2009)
13. Remove the screw (1) that secures the rear evaporator cover (3) to the outboard side of the rear heater-A/C housing (2) and remove the cover of
the housing.
14. Carefully pull the rear A/C evaporator (4) out the bottom of the rear heater-A/C housing (3). Guide the evaporator tubes (2) past the heater core
tubes (1). If the foam seals on the A/C evaporator are deformed or damaged, they must be replaced.
15. Disconnect the wire harness connector (3) from the rear blend door actuator (2) located on the outboard side of the rear heater-A/C housing (4).
16. Remove the two screws (1) that secure the rear blend door actuator to the rear heater-A/C housing and remove the actuator.
