Journey AWD V6-3.5L (2009)
1. If removed, install the four door levers (1, 2, 3 and 4) onto the right side of the air distribution housing (5) Make sure the lever retaining tabs are
fully engaged to the housing.
NOTE: If a seal on an air door is deformed or damaged, the air door must be replaced.
NOTE: Properly position the air doors within the air distribution housing by first aligning the four door levers to the scribe lines located on
the right outer side of the air distribution housing. Then, install the air doors onto the door levers with the UP mark on each air door
facing toward the top of the housing.
NOTE: If equipped with dual zone heating/A/C system, there are two blend-air doors that mate together at the centerline of the housing.
2. Align the four door levers to the scribe lines on the right outer side of the air distribution housing (5) and install the air door(s) (1, 2, 3 and 4) onto
the door levers with the UP mark on each air door facing toward the top of the housing.
3. Align the air door(s) with the pivot shaft hole(s) in the air distribution housing (3) and install the two halves of the housing together. Make sure the
