Journey AWD V6-3.5L (2009)
6. Remove two bolts (1) securing the disc brake caliper and adapter bracket (2) to the knuckle (3).
7. Remove the disc brake caliper and adapter bracket (2) as an assembly from the knuckle (3) and rotor. Hang the assembly out of the way using wire
or a bungee cord. Use care not to overextend the brake hose when doing this.
8. Remove any retaining clips, then slide the brake rotor (2) off the hub and bearing (1).
CAUTION: Prior to removal, clean area around sensor head to help prevent contaminants from entering bearing when sensor head is
removed.
9. Remove the screw (3) fastening the speed sensor head (2) to the hub and bearing (1).
10. Remove the wheel speed sensor head (2) from the hub and bearing (1), then pass it through the brake shield.
