Journey AWD V6-3.5L (2009)
Canister Purge Solenoid: Service and Repair
Removal
REMOVAL
1. Disconnect and isolate negative battery cable at battery.
2. If equipped with 3.5L engine, remove the PCM See: Computers and Control Systems/Engine Control Module/Service and Repair/Removal and
Replacement/Powertrain Control Module - Removal.
3. Disconnect electrical connector (2) from evaporator purge solenoid (1).
4. Remove purge hose and quick connect fuel tank hose (3) from evaporator purge solenoid (1) See: Fuel Delivery and Air Induction/Fuel Line
Coupler/Service and Repair.
5. Release tab to remove evaporator purge solenoid (1) from bracket.