Journey AWD V6-3.5L (2009)
7. Position the brake tube routing bracket (1) at the knuckle and install the mounting screw. Tighten the screw to 15 Nm (11 ft. lbs.).
8. Install the tire and wheel assembly (1) See: Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation.
Install and tighten the wheel mounting nuts (3) to 135 Nm (100 ft. lbs.).
9. Lower the vehicle.
10. Position the vehicle on an alignment rack/drive-on lift. Raise the vehicle as necessary to access yet to be tightened mounting bolts and nuts.
11. Tighten the upper control arm bolt nut at the knuckle to 105 Nm (77 ft. lbs.).
12. Tighten the lower control arm bolt nut at the knuckle to 105 Nm (77 ft. lbs.).
13. Tighten the toe link mounting bolt nut at the knuckle to 105 Nm (77 ft. lbs.).
14. Perform wheel alignment as necessary. See: Alignment/Service and Repair
