Journey AWD V6-3.5L (2009)
1. Position the new rear washer nozzle (3) to the mounting hole in the liftgate outer panel (1). Be certain that the rubber gasket is in position on the
back of the nozzle.
2. Reconnect the washer supply hose (2) to the barbed nipple on the back of the nozzle.
3. Push the hose and nozzle nipple into the mounting hole in the liftgate outer panel and align the anti-rotation tab to the mounting hole.
4. Using hand pressure, push firmly and evenly on the nozzle until both integral latch features are fully engaged on the back side of the outer panel.