Magnum V6-3.5L VIN V (2006)
![background image](/dodge/magnum/v6-3.5l_vin_v/Page-566003.png)
4. Position the wiring harness (3) on the cylinder head cover.
5. Reclip the wire harness track retaining tabs into the cover.
6. Install the ground strap/resistor retaining bolt onto the cylinder head cover.
7. Install the ignition coils (2). Tighten mounting screws to 6.7 Nm (60 inch lbs.)
8. Connect the ignition coil electrical connectors (2).
9. Install upper intake manifold.
10. Connect negative battery cable.