Magnum V6-3.5L VIN V (2006)
NOTE: Use care when installing halfshaft to axle assembly. The halfshaft installation angle should be minimized to avoid damage to seal upon
installation.
2. Using new circlip(s), install halfshaft (1) to rear axle assembly. Use care not to damage axle seals(2). Verify proper installation by pulling outward
on joint by hand.
3. Raise rear axle assembly into position. Align propeller shaft index marks (3) and start propeller shaft coupler-to-axle bolt/nuts by hand.
4. Install two rear axle-to-crossmember bolts (1) and torque to 220 Nm (162 ft. lbs.).