Magnum V6-3.5L VIN V (2006)
![background image](/dodge/magnum/v6-3.5l_vin_v/Page-1196007.png)
5. Install rear axle front mount isolator (1) as shown and torque bolt/nut to 65 Nm (48 ft. lbs.).
6. Again verify halfshaft inner joints are fully engaged to axle assembly
7. Remove transmission jack (1).
8. If used, remove screw-type under-hoist jack stands (2).
9. Torque propeller shaft coupler-to-axle flange bolt/ nuts to 58 Nm (43 ft. lbs.).