Neon L4-2.0L SOHC (1995)
Trim Panel: Service and Repair
A-Pillar Trim
A-Pillar Trim
REMOVAL
1. Remove instrument panel top cover.
2. Disengage clips holding trim to A-pillar.
3. Separate A-pillar trim from vehicle.
INSTALLATION
1. Position A-pillar trim panel to A-pillar.
2. Align locating pins on backside of trim panel to mating holes in A-pillar.
3. Push clips on trim panel into slots in A-pillar.
4. Install instrument panel top cover.
B-Pillar Trim-4 Door
B-Pillar Trim
REMOVAL
1. Remove bolt holding lower seat belt anchor to floor pan kick-up.
2. Remove shoulder belt height control knob.
3. Remove bolt holding turning loop to belt adjuster.
4. Remove access cover from B-pillar trim.
5. Disengage clips holding trim to B-pillar.
6. Feed seat belt turning loop and seat belt through trim panel.
7. Separate B-pillar trim from vehicle.