Neon L4-2.0L SOHC (1995)
INSTALLATION
1. Position B-pillar trim panel near B-pillar.
2. Feed seat belt turning loop and seat belt through trim panel.
3. Align locating pins on backside of trim panel to mating holes in B-pillar.
4. Push clips on trim panel into slots in B-pillar.
5. Install access cover to B-pillar trim.
6. Install bolt holding turning loop to belt adjuster.
7. Install shoulder belt height control knob.
8. Install bolt holding lower seat belt anchor to floor pan kick-up.
Cowl Side Trim Panel
Side Cowl Trim
REMOVAL
1. Disengage clips holding cowl trim to cowl side panel.
2. Separate cowl trim from vehicle.
INSTALLATION
1. Position cowl trim panel to inner cowl panel.
2. Align locating pins on backside of cowl trim panel to mating holes in inner cowl panel.
3. Push clips on trim panel into slots in inner cowl panel.
Door Opening Trim Welt
Door Opening Trim Welt
REMOVAL
1. Open door to gain access to trim welt.
2. Remove door sill trim panel.
3. Pull trim welt from door opening flange.
INSTALLATION
