Neon L4-2.0L SOHC (1995)
2.
Remove the pivot bolt and the U-nut from the seat back frame (See Illustration).
3.
Install new U-nut, P/N 6101283, on the seat back frame and new pivot bolt, P/N 4778087.
NOTE:
THE NEW PIVOT BOLT MUST BE TORQUED TO 115 +/- 9 IN.LBS. (13 +/- 1 N-M). ANY TORQUE GREATER THAN THESE
SPECIFICATIONS MAY CAUSE THE U-NUT TO CRACK, LEADING TO THE ORIGINAL NOISE COMPLAINT.
3.
Install the four screws inside the console bin, if removed for access in Step 1.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
23-20-32-95 (Both Front Seats)
0.3 Hrs.
FAILURE CODE: P8 - New Part