Neon R/T L4-2.0L VIN F HO (2001)
NOTE: When replacing a faulty RKE Module, the replacement module must be configured with the DRB III scan tool for proper operation. Refer to
Electrical, Vehicle Theft/Security, Standard Procedure - Switching Operating Modes/Configuring a New Module. Additionally, all transmitters must
be reprogrammed to the new RKE module.
1. Install the RKE module into the vehicle.
2. Connect the RKE wiring connector.
3. Install the two screws holding the RKE module to the instrument panel assembly.
4
Install the instrument panel top cover.
5. Connect the battery negative cable.
