RAM 1500 Truck 2WD V6-3.7L VIN K (2003)
1. Install the new bushing into the lower control arm using special tools 8836-2 (receiver), 8836-1 (driver), 8836-4 (spacer) with the bearing and the
threaded rod (8839).
SMALL BUSHING
1. Install the small bushings into the lower control arm using tools 8836-7 (driver), 8836-2 (receiver), 8836-3 (spacer) and the bearing with the
threaded rod (8839).
1. Remove the control arm from the vise.
2. Install the lower control arm.
3. Reset the vehicle ride height.
4. Perform a wheel alignment.