RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
WARNING: Always keep hands and clothing clear of the wire rope, hook and fairlead opening during operation and when spooling. Failure to
follow these instructions may result in personal injury or death.
CAUTION: Wire rope must spool on the winch drum in the direction indicated.
1. Feed the new wire rope end (3) through the guide rollers.
2. Attach the flat side of the wire rope end (3) to the winch drum (1), apply red thread locker to the threads and install the bolt (2).
3. Wrap the wire rope around the spool approximately one time, in the direction indicated on the spool.
4. Tighten the bolt to 3 N.m (25 in.lbs.).
5. Arrange the wire rope so it will not kink or tangle when spooled.
6. Lock the winch drum by rotating the clutch lever (2) on the winch to "Engage."
NOTE: Always make sure the clutch is engaged or disengaged fully.
