RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
4. Remove the screw (4) that secures the door trim panel (5) to the screw insert located in the center of the door (1).
CAUTION: The door trim panel is attached to the door by molded plastic retaining clips that are integral to the door trim panel. Do not
pull the door trim panel directly off of the door or damage to the trim panel and/or the power switch assembly will occur.
5. Lift the door trim panel straight upward to disconnect the molded plastic retaining clips (3) from the door.
6. If equipped, disconnect the door wire harness (2) from the power door switch assembly and remove the door trim panel.
INSTALLATION
1. If equipped, connect the door wire harness (2) to the power door switch assembly.
CAUTION: The door trim panel is attached to the door by molded plastic retaining clips that are integral to the door trim panel. Do not
force the door trim panel onto the door or damage to the trim panel and/or the power switch assembly will occur.
2. Position the door trim panel (5) and align the molded plastic retaining clips (3) to the door (1).
3. Push the door trim panel straight downward until all of the retaining clips are fully engaged to the door.
4. Install the screw (4) that secures the door trim panel to the screw insert located in the center of the door.
5. if equipped, install the manual window crank.
