RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
Hood Latch: Service and Repair
Latch Striker/Secondary Catch
LATCH STRIKER/SECONDARY CATCH
REMOVAL
1. Disconnect the release handle (4) from the secondary hood latch and striker assembly (2) and remove the handle from the grille frame (5).
2. Remove the two bolts (3) that secure the secondary hood latch and striker assembly to the hood and remove the assembly.
INSTALLATION
1. Position the secondary hood latch and striker assembly (2) to the hood.
2. Install the two bolts (3) that secure the secondary hood latch and striker assembly to the hood. Tighten the bolts to 11 N.m (8 ft.lbs.).
3. Install the release handle (4) through the grille frame (5) and connect it to the secondary hood latch.
4. If required, adjust the hood to the correct position.
