RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
4. Install the inserts.
5. Install the gear shift lever extension.
6. Install the 4WD gear shift boot.
Full Floor Console
1. Before proceeding with the following repair procedure, review all warnings and cautions. Refer to Seats / Service Precautions.
NOTE: Do not reuse the seat fasteners, always replace with new ones.
2. Position the center seat console onto the front seat assembly and roll the seat assembly back in the vehicle.
3. Install new nuts (4) attaching the center console to the drivers (3) and passenger seat.
4. Connect the electrical connector (1-if equipped).
5. Tighten the nuts (4) to 25 N.m (18 ft.lbs.).
