RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
Headliner: Service and Repair
HEADLINER
NOTE: Headliner for Quad Cab model shown. Regular cab similar.
REMOVAL
1. Remove the A-pillar trim panels, Refer to Trim Panel.
2. Remove the upper B-pillar trim panels, Refer to Trim Panel.
3. On Quad Cab models, remove the upper C-pillar trim panels, Refer to Trim Panel.
4. Disconnect the wire harness connector (1) located at the left A-pillar from the headliner wire harness (2).
5. Disconnect the headliner wire harness connector (3) from the inside rear view mirror.
6. Remove the overhead console.
7. Remove the sun visors (4).
8. Remove the sun visor supports (5).
9. Remove the dome lamp (6).
10. Remove the two coat hooks (7).
11. Lower the rear of the headliner (9) downward from the roof panel (10) and disconnect the headliner wire harness connector (8) from the center
high mounted stop lamp.
12. Lower the front of the headliner downward and remove the headliner through the passenger door opening.
INSTALLATION
1. Position the headliner (9) into the vehicle through the passenger door opening.
2. Connect the headliner wire harness connector (8) to the center high mounted stop lamp.
3. Raise the rear of the headliner upward and install the two coat hooks (7).
