RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
Sun Visor: Service and Repair
Sun Visor
SUN VISOR
REMOVAL
1. Remove the three screws (1) that secure each sun visor (2) to the roof panel and remove the visor from the headliner (3).
2. If equipped, disconnect the wire harness connector for the illuminated vanity mirror (4).
INSTALLATION
1. If equipped, connect the wire harness connector for the illuminated vanity mirror (4).
2. Position the sun visor (2) onto the headliner (3).
3. Install the three screws (1) that secure each sun visor to the roof panel. Tighten the screws to 2.2 N.m (20 in.lbs.).
