RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
6.
Remove and discard the white retainer clip from the long horizontal latch actuator rod (Fig. 1).
7.
Disconnect the latch actuator rod from the bellcrank (Fig. 1).
8.
Slide the sleeve provided in the repair kit on to the latch actuator rod. (Fig. 1).
9.
Connect the rod to the bellcrank.
10.
Install the new retainer clip provided in the repair kit, over the sleeve and rod.
11.
Re-apply the water shield.
12.
Install the speaker.
13.
Connect the power window switch harness connector to the switch.
14.
Install the door trim panel.
15.
Install the door handle.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
