RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
Illustration F
7. Use a body filler applicator to smooth the adhesive and to cover all bare metal to prevent conosion.
8. Position the backer panels into place using the clamps and/or screws from the prior dry fit process.
9. You may need to smooth or finesse the adhesive at the bond surface prior to installing the insert/repair panel.
10. Apply a small amount of adhesive to the underside of the insert/repair panel at the bare metal spots to ensure there will be corrosion protection.
11. Secure the insert/repair panel in place tising clamps and/or screws from the dry fit process.
