RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
Brake Rotor/Disc: Service and Repair
Brake Rotor - Removal and Installation
Rear Brake Rotor
ROTORS
REMOVAL
REAR DUAL WHEELS
1. Raise and support the vehicle
2. Remove the tire and wheel assembly.
3. Remove the disc brake caliper.
CALIPERS-DISC BRAKE REAR
REMOVAL
CAUTION: Never allow the disc brake caliper to hang from the brake hose. Damage to the brake hose will result. Provide a suitable support to hang
the caliper securely.
1. Raise and support vehicle.
2. Remove the wheel and tire assembly.
3. Drain small amount of fluid from master cylinder brake reservoir with suction gun.
4. Remove the brake hose banjo bolt and discard the copper washers if replacing caliper.
5. Remove the caliper slide bolts (3).
6. Remove the caliper (6) from vehicle.
7. Remove the caliper adapter bolts.
8. Remove the rear axle shaft from the housing on dual rear wheels.
9. Remove the hub and rotor assembly (C3500 only).
REAR - SRT-10
