RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
1. Compress the disc brake caliper using tool #C4212F.
2. Remove the caliper pin bolts (3).
3. Remove the banjo bolt (6) and discard the copper washer.
CAUTION: Never allow the disc brake caliper to hang from the brake hose. Damage to the brake hose with result. Provide a suitable support to hang
the caliper securely.
4. Remove the rear disc brake caliper.
INSTALLATION
REAR DUAL WHEELS
1. Install the hub to the rotor. Tighten the bolts (1) to 128 Nm (95 ft. lbs.).
2. Install the hub and rotor assembly.
3. Install the rear axle shaft to the housing with dual wheels.
4. Install the caliper adapter bolts 197 Nm (145 ft. lbs.) LD.
