RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
Brake Hose/Line: Service and Repair
Rear Brake Hose
REMOVAL - REAR BRAKE HOSE
1. Install prop rod on the brake pedal to keep pressure on the brake system.
2. Raise and support the vehicle.
3. Remove the brake line from the hose at the frame.
4. Remove the brake hose clip at the top of the hose located at the frame.
5. Remove the vent tube.
6. Remove the two brake lines at the bottom of the hose located at the axle.
7. Remove the mounting bolt for the brake hose at the axle.
8. Remove the hose.
REMOVAL - REAR TUBE / HOSE ASSEMBLY
1. Install prop rod on the brake pedal to keep pressure on the brake system.
2. Raise and support the vehicle.
3. Remove the brake line located at the axle.