RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
4. Remove the mounting bolt for the brake hose at the axle.
5. Remove the banjo bolt at the caliper.
6. Remove the hose.
REMOVAL - FRONT HOSE
1. Install a prop rod on the brake pedal to keep pressure on the brake system.
2. Raise and support vehicle.
3. Remove the tire and wheel assembly.
4. Remove the brake hose from the brake line located at the frame.
5. Remove the brake hose banjo bolt at the caliper.
6. Remove the mounting bolt securing the brake hose to the frame and remove the wheel speed sensor wire from the brake hose.
7. Remove the hose.
INSTALLATION - REAR BRAKE HOSE
1. Install the hose.
