RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
2. Install the mounting bolt for the brake hose at the axle.
3. Install the two brake lines at the bottom of the hose located at the axle.
4. Install the vent tube.
5. Install the brake hose clip at the top of the hose located at the frame.
6. Install the brake line to the hose at the frame.
7. Lower the vehicle and remove the support.
8. Remove the prop rod.
9. Bleed the brake system.
INSTALLATION - REAR TUBE / HOSE ASSEMBLY
1. Install the hose.