RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
Clutch: Service and Repair
Overrunning Clutch
Disassembly
46RE - Automatic Transmission
OVERRUNNING CLUTCH CAM/OVERDRIVE PISTON RETAINER
DISASSEMBLY
1. Remove the overdrive piston (Fig. 203).
2. Remove the overdrive piston retainer bolts.
3. Remove overdrive piston retainer.
4. Remove case gasket.
5. Tap old cam out of case with pin punch. Insert punch through bolt holes at rear of case (Fig. 204). Alternate position of punch to avoid cocking
cam during removal.
6. Clean clutch cam bore and case. Be sure to remove all chips/shavings generated during cam removal.
Cleaning and Inspection
46RE - Automatic Transmission
CLEANING
Clean the overrunning clutch assembly, clutch cam, low-reverse drum, and overdrive piston retainer in solvent. Dry them with compressed air after
cleaning.
