RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
2. Install wave spring on top of reaction ring (Fig. 193). Reaction ring and wave ring both fit in same ring groove. Use screwdriver to seat each ring
securely in groove. Also ensure that the ends of the two rings are offset from each other.
3. Assemble overdrive clutch pack (Fig. 194).
4. Install overdrive clutch reaction plate first.
NOTE: The reaction plate is the same thickness as the pressure plate in a 46RE transmission.
5. Install first clutch disc followed by first clutch plate. Then install remaining clutch discs and plates in same order.
6. Install clutch pack pressure plate.
7. Install clutch pack wire-type retaining ring (Fig. 195).