RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
12. Lift cage and inner race upward and out from the housing (Fig. 8).
13. Turn inner race 90° in the cage and rotate the inner race/hub out of the cage (Fig. 9).
INSTALLATION
NOTE: If CV joint is worn, replace entire CV joint and boot.
1. Clean all CV joint components and shaft.
2. Apply a light coat of grease supplied with the joint/boot to the C/V joint components before assembling them.
3. Align the inner race, cage and housing according to the alignment reference marks.
