RAM 1500 Van V8-5.2L VIN Y (1999)
Speaker: Service and Repair
REMOVAL
Instrument Panel Speaker
1. Disconnect and isolate the battery negative cable.
2. Remove the top cover from the instrument panel. Refer to Instrument Panel Top Cover in the Replacement of Instrument Panel Systems for the
procedures.
Instrument Panel Speaker Remove/Install
3. Remove the two screws that secure the speaker to the top of the instrument panel.
4. Pull the speaker away from the mounting hole in the top of the instrument panel far enough to access the speaker wire harness connector.
5. Disconnect the speaker wire harness connector from the instrument panel wire harness connector.
6. Remove the speaker from the instrument panel.
Front Door Speaker
1. Disconnect and isolate the battery negative cable.
2. Remove the trim panel from the front door.
Front Door Speaker Remove/Install
3. Remove the three screws that secure the speaker to the front door inner panel.
4. Pull the speaker away from the mounting hole in the front door inner panel far enough to access the speaker wire harness connector.
5. Disconnect the speaker wire harness connector from the front door wire harness connector.
6. Remove the speaker from the front door inner panel.
Rear Panel Speaker - Without Cargo Compartment Trim
1. Disconnect and isolate the battery negative cable.