RAM 2500 Truck 2WD L6-5.9L DSL Turbo (2008)
Antenna Cable: Service and Repair
Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the glove box See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair/Instrument Panel Glove Box -
Removal .
3. Remove the instrument panel center bezel See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Instrument Panel Center Bezel - Removal .
4. Remove the radio See: Radio, Stereo, and Compact Disc/Radio/Stereo/Service and Repair/Removal and Replacement/Removal .
CAUTION: Pulling the antenna cable straight out of the radio without pulling on the locking antenna connector could damage the cable
or radio.
5. Disconnect the antenna cable by pulling the locking antenna connector away from the radio.
6. Remove antenna cable from instrument panel by pulling on retaining fasteners.