RAM 2500 Truck 2WD L6-5.9L DSL Turbo (2008)
Pedal Positioning Motor: Service and Repair
Removal
REMOVAL
1. Disconnect the negative battery cable.
2. Remove the kneeblocker See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Steering Column
Opening Cover - Removal .
3. Remove the brake light switch and discard See: Lighting and Horns/Brake Light Switch/Service and Repair/Removal .
4. Disconnect the adjustable pedal cables from the brake and accelerator pedals Also clutch pedal if equipped with a manual transmission.
5. Disconnect the electrical connector.
6. Unclip the cable fasteners to the support.
7. Remove the one mounting bolt (2) for the adjustable pedal motor (1).
8. Remove the adjustable pedal motor (1) with the cables.
NOTE: Adjustable pedal cables are not serviceable. If they need service the adjustable pedal motor with the cables must be installed.