RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN 7 (2001)
Drive Belt: Service and Repair
Accessory Drive Belt - Installation
CAUTION: When installing the accessory drive belt, the belt must be routed correctly. If not, engine may overheat due to water pump rotating
in wrong direction. The correct belt with correct length must be used.
1. Position drive belt over all pulleys except water pump pulley.
2. Attach a 3/8 inch ratchet to tensioner.
3. Rotate ratchet and belt tensioner counterclockwise. Place belt over water pump pulley. Let tensioner rotate back into place. Remove ratchet. Be sure
belt is properly seated on all pulleys.
Non-A/C
1. - WATER PUMP
2. - ACCESSORY DRIVE BELT
3. - AUTOMATIC BELT TENSIONER
4. - 3/8" SQUARE BOLT
5. - MOUNT. BOLT
