RAM 2500 Van V8-5.2L Prop VIN 2 (2000)
Controller Antilock Brake: Service and Repair
Rear Wheel Antilock System
NOTE: If the CAB needs to be replaced, the rear axle type and tire revolutions per mile must be programmed into the new CAB. For axle type refer to
Transmission and Drivetrain, Differential. For tire revolutions per mile refer Steering and Suspension, Tires, Wheels and Alignment. To program the
CAB refer to Antilock Brake System, Testing and Inspection, Procedures.
REMOVAL
1. Remove the washer reservoir mounting screws.
2. Lift up the reservoir and disconnect the pump motor connector and pump hose.
3. Remove the reservoir from the engine compartment.
4. Disconnect battery cables and remove the battery.
5. Remove the power distribution center.
6. Remove the battery and power distribution center mount.
7. Remove the RWAL valve harness.