RAM 3500 Truck 2WD L6-5.9L DSL Turbo VIN 7 (2002)
Daytime Running Lamp Control Unit: Service and Repair
DAYTIME RUNNING LAMP MODULE
REMOVAL
1. Disconnect and isolate the battery negative cable.
Fig. 8 Daytime Running Lamp Module (DRLM)
2. Disengage wire connector from DRLM.
3. Remove screws attaching DRLM to left front inner fender panel.
4. Separate DRLM from fender.
INSTALLATION
1. Position DRLM on fender.
2. Install screws attaching DRLM to left front inner fender panel.
3. Engage wire connector to DRLM.
4. Connect the battery negative cable.
