RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
Front Fender Liner: Service and Repair
Splash Shield - Removal
REMOVAL
1. Open the hood and disengage any wiring or component retaining clips from the front splash shield (4) (depending on application and shield being
serviced).
2. Raise and support the vehicle.
3. Remove the eight screws (3) that secure the front splash shield to the fender rail (1) and the front fender (2).
4. Disconnect the front splash shield from the support bracket located on the front bumper and remove the splash shield.
