RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
Body / Frame Mount Bushing: Service and Repair
Body Isolator - Removal
REMOVAL
NOTE: Quad Cab model shown in the illustration. Body isolators for Regular cab models are similar.
1. Loosen all cab to frame mounting bolts (5) (six Regular cab, eight Quad Cab).
2. Remove the mounting bolts and rebound cushions (3) as necessary.
NOTE: If servicing the rear isolators (2), remove the reinforcement plates (6) and the washers (4).
3. Using a floor jack and wooden block under the cab sill (1), lift the body to gain access to the isolators and remove the isolators as necessary.
