RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
5. Install the two bolts (4) that secure the jack assembly (2) to the floor panel (3).
6. Position the jack assembly onto the two bolts and install the retaining screw (1). Tighten the screw securely.
7. On Quad Cab models, install the bolt that secures the lower seat belt anchors the floor panel near the B-pillars See: Restraint Systems/Seat Belt
Systems/Seat Belt Retractor/Service and Repair/Seat Belt Retractor - Installation. Tighten the bolt to 40 Nm (30 ft. lbs.).
8. Install the lower B-pillar trim panels See: Trim Panel/Service and Repair/Pillar Trim/B-Pillar Trim Panel - Installation.
9. On Quad Cab models, install the rear seat (1) See: Seats/Service and Repair/Seat, Center/Seat - Installation.
10. On Quad Cab models, install the rear cup holder (2).
11. If equipped, position the rear storage compartment (2) onto the rear cab trim panel (4) and install the three bolts (1). Tighten the bolts to 6 Nm (55
