RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
4. Install the inserts.
5. Install the gear shift lever extension.
6. Install the 4WD gear shift boot.
Full Floor Console
1. Before proceeding with the following repair procedure, review all warnings and cautions. See: Seats/Service Precautions
NOTE: Do not reuse the seat fasteners, always replace with new ones.
2. Position the center seat console onto the front seat assembly and roll the seat assembly back in the vehicle.
3. Install new nuts (4) attaching the center console to the drivers (3) and passenger seat.
4. Connect the electrical connector (1 - if equipped).
5. Tighten the nuts (4) to 25 Nm (18 ft. lbs.).
