RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
Sunroof / Moonroof Panel: Service and Repair
Sunroof Glass - Installation
INSTALLATION
1. Position glass panel on to mechanism lift arms.
CAUTION: Verify that the retaining tabs are located on the INSIDE of the guide mechanism arms.
2. Start the attaching screws (3).
3. Connect a 12v power supply and verify that the sunroof is in the closed position.
4. Adjust sunroof glass to fit flush with roof line See: Adjustments.
5. Tighten the screws (3) to 3.5 Nm (30 in. lbs.).
6. Position the mechanism covers (2) over the glass tabs (1) between the locating features and seat fully.
7. Verify sunroof operation and alignment.
