RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
Seat Back: Service and Repair
Rear Seat Back Mounting Bracket - Removal
REMOVAL
1. Remove the rear seat See: Service and Repair/Seat, Center/Seat - Removal.
2. Remove bolts (2) and remove the loop (1).
Rear Seat Back Mounting Bracket - Installation
INSTALLATION
1. Install the loop (1) and install the bolts (2).
2. Tighten the bolts (2) to 12 Nm (9 ft. lbs.).
3. Install the seat See: Service and Repair/Seat, Center/Seat - Installation.
Load Floor/Kneel Position Recliner Cable - Removal
REMOVAL