RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
OK, repair the open or shorted ground circuit as required.
6. Check for continuity between the heated seat element supply circuit terminal 3 of the switch/module connector of the inoperative seat and the
heated seat element connector of the inoperative seat. If OK go to 7. If NOT OK, repair the open or shorted supply circuit as required.
7. Perform the heated seat element diagnosis for the inoperative seat. See: Heater Pad to check the suspect heated seat elements. If the elements test
OK, replace the inoperative heated seat switch/module, See: Seat Heater Switch/Service and Repair/Heated Seat Switch - Removal for the
appropriate procedure. If NOT OK, replace the inoperative heated seat element, See: Service and Repair/Heater Pad - Removal for the
appropriate procedure.