RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
3. Separate the rear door opening seal (5) from the door opening flange.
Door Opening Seal - Installation
INSTALLATION
FRONT DOOR SEAL
1. Position the front door seal (6) to the bottom of the door opening, with bulb facing outboard, starting the installation at the center of the lower
flange. Press the seal onto the sill flange and work around the perimeter of the door opening until fully seated. Work in one direction, smoothing
the seal to avoid puckers or wrinkles.
