RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
5. Install the valve spring compressor top plate, washer, and nut 8319A.
6. Compress the valve springs and install the valve retaining locks.
7. Remove the valve spring compressor tool 8319A and repeat the procedure on the remaining cylinders.
8. Install new o-ring and sealing washer on injector.
9. Lubricate o-ring and injector bore.
10. Verify sealing washer (shim) was removed with old injector.
11. Install injector See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Injector/Service and Repair/Fuel Injector - Installation.
12. Install the cylinder head See: Service and Repair/Removal and Replacement/Cylinder Head - Installation.